Growing with the grow kits of Freshmushrooms is super easy. Thanks to a fully colonized substrate without fillers, these kits require definitely no maintenance. You do not also need to do much to obtain your first flush of extra psilocin. Eliminate the kit, the plastic bag and the paperclip from package. Get rid of the lid of the society kit (maintain the cover in a refuge). Wash the cover under running water. You will certainly require it again later on. Place the culture set without lid in the supplied plastic bag. Move the opening of the bag under all-time low with the mini opening upwards. The opening of the bag is now mainly shut. You do not have to stress over the air blood circulation. From the moment you see little light bulbs growing (see picture), you can start positioning the bag upright. Do not give water. The first mushrooms will be visible after about 1 week. Area the kit in a location with adequate daylight as well as in a temperature variety in between 18 ° C and 28 ° C. NEVER put the grow kit in direct sunlight. Mushrooms will grow at almost any temperature level over 15 ° C, 23 ° C is the suitable temperature for an optimal harvest. Unique heat floor coverings are available to assure this temperature level as well as not to have to heat the whole space. From this phase onwards (see image), leave the bag standing a littleo pen during, to ensure that the dampness can evaporate a little. Too much moisture is bad. Your initial harvest will certainly have to do with a week after the initial light bulbs show up. See to it you harvest prior to the first spores start to fall! These sets create numerous mushroom harvests. To do this, after the first harvest, load the kit with clean faucet water. This process is known as cold-shock and breathes new life into the mycelium as well as makes sure that there suffices wetness for the mushrooms to grow. Place the cover of the society kit back on the kit. Let the kit remainder for 12 hrs. Open an edge of the lid and also drain pipes off excess water. From here you can adhere to the directions of action 1 once more. This procedure can be duplicated a number of times.